The Basics of Stump Grinding

by | May 17, 2017 | Home & Garden

Removing a large tree within a residential neighborhood is a very difficult job. It is certainly not something that a local gardener can help you with; you will need to call in a professional arborist from a reputable company such as timberlinetreeservicemn.com to get the tree removed. However, even then, the tree is never fully removed from the ground. The roots of large trees spread very deep and in different directions, so uprooting the whole tree isn’t really an option. Instead, most arborists usually cut the tree from the stump and then grind it.

How Is the Process Done?

To grind the tree, the first thing that the company will do is to decide the point from which the tree will be cut. Usually, stump grinding is done in steps. Removing the tree is the first step in this stage; a point will be marked on the trunk at which the tree will be cut, and the stump will be exposed. This point should be as close to the ground as is possible. Stump grinding is only done once the tree has been cut down completely and removed from the premises. A crane is used to ensure that the tree doesn’t fall on the ground.

Grinding the Stump

One the stump is left exposed, a special stump grinding tool is brought onto the scene. The company uses the grinding tool to grind the stump into the ground, so that the part above isn’t left exposed. Many people also prefer to leave a small part of the stump above the ground, as it can serve as a great place to sit and can also add to the backdrop of the garden. Therefore, you can decide how far down you would like the stump to be grinded. These are just some of the important things that you should know about the stump grinding process.

Latest Articles

Categories

Archives